chambers

SVR creates all custom chambers from lengths of twin wall pipe, this allows a large range of sizes (from 150mm - 2400mm) however large sizes are also available.

Any and all inlets and outlets can be accounted for during fabrication and reducers or adaptors can be added to open even more options. For example a 600mm chambers complete with a 225mmØ main channel, with one 110mmØ inlet, one 150mmØ inlets and the main outlet reduced to suit 178mmØ. This chamber is entirely possible due to the bespoke fabrication available from SVR.

Any customer requirements can be accounted for during the fabrication of an inspection chamber, the chamber pictured below has a custom made cover and the chamber itself has hole pre-drilled, allowing the customer to pour concrete into the base. Just one example of the service SVR Plastics offer to customers.

Required measurements for custom chambers

  • Diameter
  • Depth
  • In/Outlet diameter
  • Number of In/Outlets
  • Orientation of In/Outlets

Plus any specific features required e.g. cover, channel and benching or slit bucket.

For more information or to receive a quote please download our Chamber Dimension Sheet

 

Fabricated Twin wall Inspection Chamber

Fabricated Twin wall Inspection Chamber

Holes drilled to aid pouring concrete into base

Holes drilled to aid pouring concrete into base

Adaptable Chamber, Sumpless Chamber

Adaptable Chamber, Sumpless Chamber

Custom made cover

Custom made cover

90 Degree Chamber

90 Degree Chamber

Multiple Diameter Spigot Chamber

Multiple Diameter Spigot Chamber

Chamber Complete With Vortex Control

Chamber Complete With Vortex Control